What is the main purpose of using an angle grinder to process sharp metal edges?
Show more
4 hours ago • Creation Daily
A. To round the edges, reduce cutting hazards, and improve finish
B. To make the metal soft like rubber
C. To increase the length of the metal bar
D. To make the metal change color automatically
75 votes
6
0
2 days ago • Creation Daily
What materials can an angle grinder help polish when using the correct attachment?
A. Metal, stainless steel, stone, or painted surfaces
B. Water inside a bottle
C. Air inside a room
D. Broken electrical wires
398 answered
22
0
3 days ago • Creation Daily
What is the use of an angle grinder when fitted with a sanding disc?
A. Automatically measuring wood moisture
B. Increasing the power supply voltage
C. Welding metal without welding rods
D. Sanding, smoothing, or preparing surfaces before painting
292 answered
20
0
4 days ago • Creation Daily
Which attachment can be used with an angle grinder to clean metal surfaces?
A. A wire brush or wire wheel
B. A wood drill bit
C. A hand saw blade
D. Paper tape
463 answered
27
0
5 days ago • Creation Daily
When fitted with a proper grinding disc, what can an angle grinder be used for?
A. Smoothing welds, sharp edges, or rough metal surfaces
B. Measuring material length
C. Automatically drilling deep holes
D. Instantly cooling metal
333 answered
22
0
6 days ago • Creation Daily
What materials can an angle grinder be used to cut?
A. Live electrical wires
B. Soft fabric and writing paper
A. Metal, tiles, stone, or thin concrete
D. Water and air
428 answered
18
0
7 days ago • Creation Daily
Why should a cracked or chipped cutting disc not be used on an angle grinder?
A. Because the tool will not be able to turn on
B. Because the disc may break at high speed and cause danger
C. Because the side handle will heat up immediately
D. Because the material will not be cut
527 answered
34
0
8 days ago • Creation Daily
When cutting metal with an angle grinder, why should the tool be held firmly with both hands?
A. To reduce the length of the power cord
B. To make the cutting disc rotate more slowly
C. To let the tool automatically adjust the cutting depth
D. To control cutting force, reduce vibration, and limit kickback
346 answered
24
0
9 days ago • Creation Daily
Before changing the disc on an angle grinder, what is the first safety step?
A. Disconnect the power supply or remove the battery
B. Turn on the tool at high speed
C. Remove the safety guard
D. Dip the grinding disc into water
515 answered
41
0
10 days ago • Creation Daily
What is the main function of the guard on an angle grinder?
A. To automatically replace the grinding disc
B. To increase the rotation speed of the disc
C. To make the tool lighter to hold
D. To block sparks, metal dust, and fragments from the grinding disc
541 answered
31
0